Wakeboard / Ski / Surf Boat Prop Puller w/ Swivel by Powertech 3/4''-1 1/8''
Brand : Powertech
- In Stock
- Jaw opens from maximum of 4.5" to 3.25"
- Works on 3/4" to 1-1/8" shaft diameters
- Pin design ***Must have dimple in end of shaft to use (See 2nd pic)***
- ***You must apply anti-sieze on puller point and threads to prevent galling***
- Designed to remove 2, 3 and 4 blade propellers on inboard shafts
- Made of high strength heat treated alloy steel and plated for rust protection
- Works great on tournament ski boats and other inboard with a 1-1/8" maximum shaft size
- These tools have fine thread screws to enable a strong pulling force with little effort
- Clearance required between propeller hub and strut is 1/4" minimum.
- Manufactured by Powertech
- Part # PULR-PT-POINT